776,00 € Alv. 25,5%
We will send the products you ordered within 1-5 working days after placing the order. If the delivery time for one of the products you ordered is more than 5 days, we will contact you.
Pickup from the factory €0, pickups Mon-Fri between 8 am and 2 pm. Wait for order confirmation before pickup. Arrange a pick-up by phone 020 785 1600 or by email with our customer service.
We reserve the right to change delivery costs if the delivery destination is located in Lapland or the archipelago.
Parra sauna stoves are 100% Finnish high-quality wood-burning stoves manufactured by Teuvan Keitintehdas Oy, a Finnish company with a proud 95-year history.
A high-quality Parra wood-burning sauna stove is an excellent choice for your sauna! The Parra Q20 wood-burning sauna stove is suitable for a 8-21 m³ sauna and it will provide pleasant steam for everyone in the sauna. Parra Q20 soveltuu is suitable for middle size sauna. A well-managed control of the combustion air allows the wood to burn cleanly. The flue connection is either above or behind the sauna stove. Parra sauna stoves are made from high-quality steel and will last for many decades.
In the designing of our sauna stoves a great deal of emphasis has been placed on energy efficiency and the cleanliness with which the wood burns. The firebox of the sauna stove has be redesigned and a combustion air control system has been added to the firebox which more efficiently burns the flammable gases vaporized in the burning process and decreases heat stress to the frame of sauna stove. Parra sauna products are an ecological alternative. The efficiency of our products is constantly being developed which can also be seen in the design of our low-emission sauna stoves. Our products meet all current and future legal and regulatory requirements.
Due to the new structure of our sauna stove casings, the thermal effect on surrounding structures has been reduced. Due to this, safety distances have also been reduced which then makes it easier to conveniently place the sauna stove within the sauna. An integrated protective mantle has been developed especially for the Q20 stove.
we manufacture our sauna stoves entirely of rustproof materials, so our sauna stoves will better withstand moist climatic conditions.
Protective walls allow a sauna stove to be installed closer to combustible materials. If the sauna stove is installed on a wooden floor or a tile floor containing a moisture barrier, a protective base will be required.
| Accessory | Increase in the height of the chimney joint | Safety distances to combustible materials | Parra Q20 |
|---|---|---|---|
| Water heater | 525 mm | – sides | 250 mm *) |
| 65° angled flue pipe | 246 mm | – back | 250 mm *) |
| 90° angled flue pipe | 177 mm | – front | 500 mm |
| 25 cm flue pipe | ~ 200 mm | – up | 1150 mm |
| 75 cm flue pipe | ~ 700 mm | Minimum distance (air gap) to non-combustible walls | 50 mm |
*) Can be reduced to 150 mm by using the Q20 stove protective mantle,
or can be reduced to 100 mm by using a protective wall for a Parra sauna stove, available as an accessory.
In these cases a radiant heat shield for the flue will also be required, available as an accessory.
"*" indicates required fields
37
Delivery: 1-5 days
Ask for an offer!
25
Delivery: 1-5 days
Ask for an offer!
9
Delivery: 1-5 days
Ask for an offer!
8
Delivery: 1-5 days
Ask for an offer!
10190500
With the help of the wall-passing collar, you can cover the connection through the brick chimney. The wall-passing collar is made by 2 piece, and...
Delivery: 1-5 days
Ask for an offer!
10190450
A flue pipe with a 65° angle, suitable for Parra sauna stoves.
25
Delivery: 1-5 days
Ask for an offer!
10190053
A Parra protective base can be used to safely install a sauna stove on any type of floor surface. The protective base’s dimensions are 500...
1
Delivery: 1-5 days
Ask for an offer!
TK002333.B
The Parra Q20 stove's protective mantle is used to reduce (halve) the stove's safety distance to combustive structures.
Teuvan Keitintehdas Oy
Keitintehtaantie 29
64700 TEUVA
